How would I go about fixing it so an SCV can build things that normally aren't even 'built,' e.g. a standalone Reactor (without a barracks, starport, or factory), Orbital Command, or Xel'Naga watchtower?
I figured I could just copy the Build abilities from something like a regular Command Center, but I can't seem to find the actual build abilities. I keep just getting back to the buttons. What am I missing?
How to build your own tech-tree. This covers making a probe build a new building. The process is essentially the same for what you want, just make the scv build your building instead of the probe.
yep was just what i needed. just had to change it up a little bit, wasn't too hard. i am having one resultant problem though... i've got my guy able to successfully build a reactor without any other buildings attached to it, but i can't figure out how to make the bloody thing stay upright... it's always flat on the ground, as if you had built it on a barracks then lifted the barracks off. I tried negating both the ReactorIsDetached and TechReactorIsDetached validators, and also tried cahnging the ReactorNotBarracks/Factory/Starport ones to not equal to, but nothings doing the job.
am i missing something obvious? (probably)
::edit:: nevermind. I didn't actually solve that problem, but after moving on, I did discover that when the reactor is training a unit, it goes upright and uses the active animation too, so it kinda bounces down and back up between units training, which is not really intentional but looks kinda cool anyway, so... :p
::edit again:: erm. thanks zelda! and yes, it does. :P
How would I go about fixing it so an SCV can build things that normally aren't even 'built,' e.g. a standalone Reactor (without a barracks, starport, or factory), Orbital Command, or Xel'Naga watchtower?
I figured I could just copy the Build abilities from something like a regular Command Center, but I can't seem to find the actual build abilities. I keep just getting back to the buttons. What am I missing?
-
View User Profile
-
View Posts
-
Send Message
Curse PremiumMy tutorial series (this is part 5)
http://forums.sc2mapster.com/resources/tutorials/8014-data-moving-from-wc3-editor-to-sc2-editor-part-5-custom/
How to build your own tech-tree. This covers making a probe build a new building. The process is essentially the same for what you want, just make the scv build your building instead of the probe.
yeah its prety easy
find your SCV unit
- go to SCV - build ( abilitie )
- add the building you want ( almost all building from doodas are there )
- add the building/abilitie to your SCV command card , your done!
In the SCV build abilitie you decide the Cost and w/e of the building.
3 step prosses.
well mroe then 3 step if u modifi3e the building and give it a custum button ;)
@Selfcreation: Go
Thought I tried just that earlier and it didn't work... ill go back and take a closer look when I get off work tonight.
@zeldarules28: Go
Ill check it out and give it a go when I get home as well. Musta missed that in the tutorials when I was looking lol
Thanks both :)
@zeldarules28: Go
yep was just what i needed. just had to change it up a little bit, wasn't too hard. i am having one resultant problem though... i've got my guy able to successfully build a reactor without any other buildings attached to it, but i can't figure out how to make the bloody thing stay upright... it's always flat on the ground, as if you had built it on a barracks then lifted the barracks off. I tried negating both the ReactorIsDetached and TechReactorIsDetached validators, and also tried cahnging the ReactorNotBarracks/Factory/Starport ones to not equal to, but nothings doing the job.
am i missing something obvious? (probably)
::edit:: nevermind. I didn't actually solve that problem, but after moving on, I did discover that when the reactor is training a unit, it goes upright and uses the active animation too, so it kinda bounces down and back up between units training, which is not really intentional but looks kinda cool anyway, so... :p
::edit again:: erm. thanks zelda! and yes, it does. :P
-
View User Profile
-
View Posts
-
Send Message
ModeratorsJust look under the actor events for it and remove those responsible to it becoming inactive.
Contribute to the wiki (Wiki button at top of page) Considered easy altering of the unit textures?
https://www.sc2mapster.com/forums/resources/tutorials/179654-data-actor-events-message-texture-select-by-id
https://media.forgecdn.net/attachments/187/40/Screenshot2011-04-17_09_16_21.jpg