I have been having problems with the command card on one of my units lately
I have my building "Research Facility" clearly displayed on the command card along with the appropriate ability, button, etc. Yet it won't seem to show up on the command card ingame (even though it was working a few hours ago)
---
Another slight annoyance: My top left spot occasionally gets swamped with "Unknown" but it doesn't seem to have any effect on the game
Ya I think the Command Card is a little buggy right now. I created a complete command card 2 for my unit and the Data Editor simply would not recognize it. I ended up having to create another one on command card 4 to get it to work properly.
Never had that with command card unless using duped stuff. Odds are it is unknown because you duped the stuff and then changed the ID string unlinking it from everything. As for not showing in the command card, that can have two reasons. Firstly the button is set to suppressed under the build ability and secondly your unit is lacking the right build ability under the Ability - Abilities - Ability field.
Rollback Post to RevisionRollBack
Contribute to the wiki (Wiki button at top of page) Considered easy altering of the unit textures?
I changed it from suppressed to available and that seemed to fix it. The strange this is it seems like all my other buildings worked fine when they were suppressed (along with all of the default buildings) Could anyone explain what the Info-Button-State category means?
I have been having problems with the command card on one of my units lately
I have my building "Research Facility" clearly displayed on the command card along with the appropriate ability, button, etc. Yet it won't seem to show up on the command card ingame (even though it was working a few hours ago)
---Another slight annoyance: My top left spot occasionally gets swamped with "Unknown" but it doesn't seem to have any effect on the game
i have had similar issues. there seems to be no rhyme or reason to it. very peculiar...
Ya I think the Command Card is a little buggy right now. I created a complete command card 2 for my unit and the Data Editor simply would not recognize it. I ended up having to create another one on command card 4 to get it to work properly.
I switched everything over to command card 4 (and switched which submenu build goes to to 4) but it didn't seem to make any difference.
Maybe there's an issue with the requirements for that ability? Make sure nothing snuck in there or that you edited a requirement it was using.
Never had that with command card unless using duped stuff. Odds are it is unknown because you duped the stuff and then changed the ID string unlinking it from everything. As for not showing in the command card, that can have two reasons. Firstly the button is set to suppressed under the build ability and secondly your unit is lacking the right build ability under the Ability - Abilities - Ability field.
Contribute to the wiki (Wiki button at top of page) Considered easy altering of the unit textures?
https://www.sc2mapster.com/forums/resources/tutorials/179654-data-actor-events-message-texture-select-by-id
https://media.forgecdn.net/attachments/187/40/Screenshot2011-04-17_09_16_21.jpg
I changed it from suppressed to available and that seemed to fix it. The strange this is it seems like all my other buildings worked fine when they were suppressed (along with all of the default buildings) Could anyone explain what the Info-Button-State category means?
Save map as SC2 Components, remove command card from unit and re-make it in editor.