Have you tried to order that mothership to patrol (not move - patrol) between these points?
After route 8 you can "run trigger" route 1 again. Or some something similar solution by running trigger that orders mothership to start that route again.
Like:
unit enter region path1 - run trigger path 2
unit enter region path2 - run trigger path 3
...
unit enter region path8 - run trigger path 1
etc.
If I remember correctly you can also wait that actions are finished before running next action - something like this:
Order [unit] to move point "route1" AFTER existing orders
I'm not 100% sure but I think you make it all in one trigger by that "after existing orders" thing.
Like Terhonator was saying, you can have the triggers send the unit to the next trigger. For example, when the mothership enters route 2, (unit enters region 'route 2') send the unit to route 3 (issue order(move 'mothership' to center of region 'route 3')). So when the unit enters region 8 it is told to go to region 1.
The only hiccup you will find in this method is in the very beginning. Either, have the unit start in route 1 region and the map initialization trigger issue an order to move to route 2. Or have the unit start outside route 1 region and issue the unit order to move into route 1 region.
If you have any questions on this concept just ask, but it will work.
Ok, sorry that I haven't been answering your replies for 3 days, but I did not notice the second page on this thread.. :/
The Mothership is going through route 1 to 8 and back to 1 again, but I don't know how to restart it, so I tried Terhonator's idea about the "Run trigger" thing.
This is what I came up with:
MothershipRoute8EventsUnit-InfestedMothership[13.89,181.40]EntersMothershipRoute8LocalVariablesConditionsActionsGeneral-If(Conditions)thendo(Actions)elsedo(Actions)If(Triggeringregion)==MothershipRoute8ThenUnit-OrderInfestedMothership[13.89,181.40]to(MovetargetingMothershipRoute1)(ReplaceExistingOrders)Trigger-RunMothershipRoute1(CheckConditions,Don't Wait until it finishes)Else
I also tried to put a "Wait 15 seconds gametime" action after the "Order I M to ( Move targeting Mothership Route 1), but with no luck.
So the only thing I need, is something to restart it.
Have you tried to order that mothership to patrol (not move - patrol) between these points?
After route 8 you can "run trigger" route 1 again. Or some something similar solution by running trigger that orders mothership to start that route again.
Like:
unit enter region path1 - run trigger path 2
unit enter region path2 - run trigger path 3
...
unit enter region path8 - run trigger path 1
etc.
If I remember correctly you can also wait that actions are finished before running next action - something like this:
Order [unit] to move point "route1" AFTER existing orders
I'm not 100% sure but I think you make it all in one trigger by that "after existing orders" thing.
Hope this solves your problem. =)
Like Terhonator was saying, you can have the triggers send the unit to the next trigger. For example, when the mothership enters route 2, (unit enters region 'route 2') send the unit to route 3 (issue order(move 'mothership' to center of region 'route 3')). So when the unit enters region 8 it is told to go to region 1.
The only hiccup you will find in this method is in the very beginning. Either, have the unit start in route 1 region and the map initialization trigger issue an order to move to route 2. Or have the unit start outside route 1 region and issue the unit order to move into route 1 region.
If you have any questions on this concept just ask, but it will work.
Ok, sorry that I haven't been answering your replies for 3 days, but I did not notice the second page on this thread.. :/
The Mothership is going through route 1 to 8 and back to 1 again, but I don't know how to restart it, so I tried Terhonator's idea about the "Run trigger" thing.
This is what I came up with:
I also tried to put a "Wait 15 seconds gametime" action after the "Order I M to ( Move targeting Mothership Route 1), but with no luck. So the only thing I need, is something to restart it.
You still cant make it patrol??