I changed it to a 9x9 square with another 4x4 square right beside it. I'm going to see if it works when I maintain the aspect ratio by making the reactor 6x6 instead of 4x4, but I don't really want it to be that big.
Also, when I fly my barracks over, it does correctly display the graphic for where it should be placed.
-Changed Barracks actor scale to 3.0
-Changed Reactor actor scale to 2.0
-Changed Barracks footprints from 3x3 to 9x9
-Changed Reactor footprint from 2x2 to 4x4
-Changed Reactor placement footprint to match new configuration
-Changed Reactor's add-on offsets so that it's built in the right place
Problem is it won't attach. I tried flying the barracks around and trying different points, no luck.
What am I missing? Is there a value somewhere that denotes where the add-on attaches (and not just where it is placed/built)?
Thanks.
Did you also change the footprints of the Reactor Placement "Footprint 3x3 + 2x2 (AddOn)"?
-
View User Profile
-
View Posts
-
Send Message
ModeratorsTrue for attachments having compatible footprints is a must.
Contribute to the wiki (Wiki button at top of page) Considered easy altering of the unit textures?
https://www.sc2mapster.com/forums/resources/tutorials/179654-data-actor-events-message-texture-select-by-id
https://media.forgecdn.net/attachments/187/40/Screenshot2011-04-17_09_16_21.jpg
In reply to totemhokem98133:
Yes
I changed it to a 9x9 square with another 4x4 square right beside it. I'm going to see if it works when I maintain the aspect ratio by making the reactor 6x6 instead of 4x4, but I don't really want it to be that big.
Also, when I fly my barracks over, it does correctly display the graphic for where it should be placed.
What offsets you used for addon? Y = -2.5 and x = 6.5 ?