SC2Mapster

blessed hammers from diablo 2.

you click the button and 1 hammer starts to spin around you in a circle, about 2 times(720), anything it comes in contact with takes damage.

Also the pally spell where he burns the ground(pally from wow) click the button and an area on the ground where he was standing deals damage per second, the pally can move, but that spot will still be there for awhile

@threeleven: Go

Can't help with the first one right now but for the second one, you can take a look at Psi Storm or Razor Plague(this one as long as you have the campaign dependency loaded) these both apply an effect that has X amount of duration at location and does X damage. Just change it from Targetable to Instant, and be sure to make the damage NOT affect the caster unit. Since I believe if you made it an Instant it will cast the ability directly ontop of the caster unit.

i know this is a necro post but i would like to know how to make blessed hammer and have it exactly like diablo so if you put points into it you can summon more

@DrSuperEvil: Go

now with the mover how do i set it up i was thinking of using the keuken531's ion saw ability but instead have it go around the caster how would i set up the mover with that

@DrSuperEvil: Go

um i couldn't find a mover for the colossus attack beam

i would like to use the ability kueken made as my base because i like the way it handles its damage effect

i dont think this will work with the ion saw it actually uses a mover to get the directions

ill have to play around with it

ok im gonna do it your way DrSuperEvil but one more question what would i put in the offset to make it go around the caster im modifying the colossus weapon directly in a test map to get a hang of it

here is some info on what i want:
- go around unit 3 to 6 times
- have about a 5 radius

i just want to know what offsets will make a complete circle with a 5 radius around lets say colossus, i can probably make it go around multiple times by setting amount of times it uses the persistent effect.

@DrSuperEvil: Go ok thanks

Quote from DrSuperEvil:

Best bet is the old graph paper and pencil on a string that winds around a pole of a certain diameter method for determining the offsets for a spiral.

i ended up getting an image of graph paper and making a circle on it then using a plane to figure it out.
For people that want a circle with a radius of 4 around a unit here's the offsets:

ok i got it going around but im unable to get it to go around like lets say 5 times with one button push how do i persist a persist to keep firing after it finishes it goes again i could just add more to the offsets but that will restrict me to have that many times around i want to be able to change the amount it goes around

Quote from xXdRaGoNrIdDeRXx: Go

ok i got it going around but im unable to get it to go around like lets say 5 times with one button push how do i persist a persist to keep firing after it finishes it goes again i could just add more to the offsets but that will restrict me to have that many times around i want to be able to change the amount it goes around

You could make another persistent effect which uses that persistent effect 5 times.

@peranzormal: Go

tried that it doesn't work i might use just a spiral and have it go around with a circle at the end of spiral.
offsets in next post :)

Spiral offsets it can fit just before the circle because the last point in the spiral is the starting point in the circle

big problem the editor cant have more than 32 offsets this is a problem. Is there anyway around this i want the spiral and the circle at the end

i got it to keep spinning by doing a create persistent to call the other persistent for some reason now its working w.e anyways still need to find a way to have the spiral

here is what i have gotten so far